Pipe beveling is the process of forming an angle between the edge of the pipe or the end of the tube and a plane perpendicular to the surface. The standard pipe bevel angle for welding is 37.5 degrees. Other angles and special forms, such as j bevel angle can also be produced using an automatic pipe beveling machine at the end of the pipe or tube.
Why bevel a pipe?
The bevel of a pipe or tubing is the most commonly used to prepare the ends for welding. For safety and aesthetic considerations, it can also be used for deburring the cutting ends.
Beveling Machine
Why do companies automate the pipe beveling?
Save time-the stationary pipe beveling machine is many times faster than other methods, such as manual grinding, flame-cutting, hand-held beveling machine, or loading into a lathe.
No more dirty operations, such as hand grinding or torches.
The bevel angle of the pipe is consistent and accurate each time, and the bevel or deburr ID of the pipe end face can be adjusted as needed.
The cycle time is usually in the range of 5 to 20 seconds, depending on the size
Eliminate the ergonomic problems caused by the operator when operating hand tools
All chips are contained in the machine, which is safer than manual grinding or torch grinding.
Low operating cost, mainly using industry-standard carbide tools
Easy to bevel stainless steel and materials that are not suitable for torch burning.
Special forms such as j bevels are easy to produce.
Can be operated by a non-skilled operator once set up.
Our pipe beveling machine will provide a safer, more accurate, and more repeatable pipe beveling than any manual method.
Check out all our pipe beveling machines and explore the full range of pipe beveling solutions. We are Pipe beveling machine suppliers. Please feel free to contact us if you need or want to know about pipe beveling machines.
评论
发表评论